- SUBGARD's
are used primarily for maintaining a constant
water level in the ground water. SUBGARD's
are totally self-adjusting and require
no maintenance. Place the SUBGARD in the
well above the submersible pump exactly
where the water draw down level is desired.
Allow the pump to run constant and the
SUBGARD will re-circulate the difference
between your pumps GPM and the wells yield,
sending exactly what the well is producing
to the surface. SUBGARD's maintain a cone
of depression and prevent contaminated
water from moving off site. Also, allowing
for easy removal of floating hydrocarbons
without water agitation.
- SUBGARD's
allow environmental consultants the opportunity
to maintain a constant and specific water
level in the ground
- SUBGARD's
maintain a cone of depression in the well
and allow for easy removal of floating
hydrocarbons.
- SUBGARD's
hold drawdown levels constant with ¼"
variation, 24 hours a day, 7 days a week.
- When
used in landfill applications, SUBGARD's
prohibit off-site migration of contaminated
ground water.
- SUBGARD's
allow submersible pumps to run continuously
instead of cycling on and off even when
the yield of the well is insufficient.
- SUBGARD's
allow water to be pumped to the surface
continuously without interruption 24 hours
a day.
- SUBGARD's
will re-circulate exactly the difference
between the pump capacity and the well
yield. Thereby delivering to the surface
the exact amount of water which the well
is yielding
For
Example: The
pump is producing 10 GPM. The well is yielding
only 3.5 GPM. In this application, the SUBGARD
will re-circulate 6.5 GPM back into the
well and allow exactly 3.5 GPM to continuously
go to the surface. If the well yield changes,
SUBGARD automatically compensates for the
change.
|
